Grade 1
(Pure Titanium - High Ductility)
It is the softest and most ductile member of the CP titanium family.
Grade 2
Pure Titanium - Industry Standard
Described as the "workhorse" of the industry.
Grade 3
Pure Titanium - Medium-High Strength
Offers higher mechanical strength compared to Grades 1 and 2.
Grade 4
Pure Titanium - Highest Strength
Due to its increased oxygen and iron content, it is the member with the highest mechanical strength in the pure titanium series.
Grade 5
(Ti-6Al-4V) - Aerospace Alloy
Accounts for more than half of the world's titanium consumption.
Grade 23
(Ti-6Al-4V ELI) - Medical Alloy
It is the chemically purer version of Grade 5 (Extra Low Interstitials This purity gives it outstanding biocompatibility, high fatigue life, and microstructural homogeneity.
Grade 6
(Ti-5Al-2.5Sn) - High Temperature Alloy
Offers excellent stability and excellent weldability at high temperatures.
6-6-2
(Ti-6Al-6V-2Sn) - High Strength Alloy
Heat treatable; offers approximately 20% higher mechanical strength compared to Grade 5, but its weldability is relatively lower.
Grade 7
(Ti-0.15Pd) - Extreme Corrosion Resistance
It has the same mechanical properties as Grade 2 but Palladium (Pd) is added to its structure.
Grade 9
(Ti-3Al-2.5V) - Hydraulic Alloy
Known as "Half Grade 5".
Grade 12
(Ti-0.3Mo-0.8Ni) - High Temperature Alloy
Contains small amounts of Molybdenum and Nickel.
6-2-4-2
(Ti-6Al-2Sn-4Zr-2Mo) - High Creep Resistance
Provides excellent creep resistance and high mechanical strength at elevated temperatures up to 540°C.
6-2-4-6
(Ti-6Al-2Sn-4Zr-6Mo) - Deep Section Performance
Offers full hardenability in thick-section parts.
8-1-1
(Ti-8Al-1Mo-1V) - High Stiffness Performance
It is one of the standard titanium alloys with the lowest density and the highest modulus of elasticity (stiffness).
10-2-3
(Ti-10V-2Fe-3Al) - Extreme Strength
Offers very high strength combined with superior toughness.